manipulator
Case Introduction
CZ operator
Product introduction
CZ series operators have the characteristics of good mobility and large operating range. Often with welding machine, roller frame, positioner and other equipment supporting linkage, to form an automatic welding center. Widely used in boiler, pressure vessel, petrochemical machinery and other round cylinder parts processing, especially suitable for cylinder parts inside and outside joints, ring longitudinal joints welding processing; It can also be used for surfacing welding of workpieces and welding of long welds of some large structural parts. In addition to the welding machine, the front end of the operator can also be installed with other working heads, which can be used for cutting, grinding, painting, flaw detection and other operations.
Main feature
Product independent research and development: rich standard configuration, support beam span, track length customization.
High quality brand inverter: wide speed range, high precision, parameters can be preset and reproduced.
The cross arm and column adopt the box structure: compact structure and good rigidity.
Built-in counterweight of the column: smooth lifting of the transverse arm and reliable self-locking position.
Mechanical, electrical multiple protection: to ensure the user's personal safety and reliable operation of equipment.
Building block design: rotary, walking, manned, inner telescopic arm and other functional mechanisms can be selected according to the need.
User-friendly operation interface: simple and convenient to use.
The integrated control system is used to integrate the manipulator and welding control system in the main control cabinet, far away from the high temperature working area; The hand control box and the main control cabinet constitute remote control and near control modes, and the linkage interface is reserved to facilitate synchronous linkage with the roller frame, displacement equipment, welding power supply, flux recovery - conveying system, etc.
|
|
specification |
||||||
|
parameter |
2X2 |
3X3 |
4X4 |
5X5 |
6X6 |
7X7 |
8X8 |
|
Cross arm lift stroke |
2m |
3m |
4m |
5m |
6m |
7m |
8m |
|
Boom lifting speed |
80-800mm/min (variable frequency stepless speed regulation, digital display) |
||||||
|
Transverse arm expansion stroke |
2m |
3m |
4m |
5m |
6m |
7m |
8m |
|
Transverse arm expansion speed |
150-2000mm/min(variable frequency stepless speed regulation, digital display) |
||||||
|
Trolley travel speed |
150-2000mm/min (variable frequency stepless speed regulation or manual walking) |
||||||
|
Column rotation speed |
0.03-0.75rpm (variable frequency stepless speed regulation or manual rotation) |
||||||
|
The transverse arm is allowed to distribute the total load evenly |
100kg |
200kg |
400kg/600kg |
||||
|
Maximum extension of the transverse arm |
2950 |
3950 |
5100 |
6100 |
7250 |
8300 |
9300 |
|
Minimum extension of the transverse arm |
950 |
1100 |
1250 |
1300 |
|||
|
Car inside distance |
1430 |
1730 |
2000 |
2500 |
|||
|
Power supply condition |
3-380v±10%, 50HZ/60HZ |
||||||
Keywords:
manipulator