Product
Portable CNC Saddle Cutting Machine SF-14AP
Classification: CNC cutting machine
Product Introduction
Function：
1.The SF-14AP type equipment supports the cutting of two orthogonal saddle holes (01 model), and the stainless steel cylinder hole adsorption tooling needs to be made by Party A on site;
- Fast loading and unloading can be achieved by magnetic adsorption, and the height can be adjusted by the main support lifting device;
- Through the laser positioning center, the host head can be moved through the rotating joint, convenient for the center;
- Through the built-in program parameter input to achieve simple operation, as shown in the figure;
- Through the miniaturization design to achieve perfect portability;
- The machine can be selected in addition to oxygen, acetylene cutting nozzle, can also choose propane cutting nozzle, natural gas cutting nozzle or liquefied gas cutting nozzle, using propane gas cutting, natural gas cutting or liquefied gas cutting, but also with plasma power plasma cutting.
Parameters:
|
Product name |
CNC saddle cutting machine |
||||
|
Model |
SF-14AP |
||||
|
Aperture range |
angle of preparation |
+45° |
50-1000mm |
The 50mm-1200mm pipe with an orthogonal hole in the outer groove can arc ignite in waste areas. |
|
|
0° |
270-1200mmm |
||||
|
-45° |
460-1300mm |
||||
|
Quill feeds |
0-250mm |
||||
|
Cutting speed |
0-500mm/min |
||||
|
Fixed bevel Angle
|
torch cutoff |
±45° |
When the ratio of the opening diameter to the cylinder diameter is bigger than 1/3, the groove degree needs to be reduced accordingly. The groove angle should be less than 15 degrees for thickness over 100mm. |
||
|
Cutting accuracy |
±2mm(depend on the work piece standard) |
||||
|
Power |
60W |
||||
|
Power supply |
AC 220V/50Hz
|
||||
Keywords:
Portable CNC Saddle Cutting Machine SF-14AP
Immediate Consultation
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
